Raipur HydraulicsMONGOLIAFROM RAIPUR, INDIA Send a requirement
Illustrative image
Home / Hose guide
Field guide

Cold-start hose guide for Mongolian mines

What extreme cold does to hydraulic hose, and how to choose and look after hose for Gobi winters.

Gobi and steppe conditions and what they mean for hose

Mongolia has some of the harshest operating conditions for hydraulic hose anywhere. These are the factors that decide our quotations.

ConditionWhat it does to hoseHow we quote for it
Winter starts below −30 °CStandard covers crack and seals stiffen at cold startHose with a low-temperature rating matched to your coldest start, stated on the quotation
Very large daily temperature swingsRepeated expansion and contraction stresses the crimpCrimping to the fitting maker's data and pressure testing of every assembly
Fine Gobi dust and windCovers wear where dust gets between hose and frameSpiral guards and sleeves at contact points
Long transit through ChinaKits can sit in transit and at the border for weeksSealed cases packed per machine with clear transit documents

What happens at a cold start

At very low temperatures the rubber cover and tube of an ordinary hose lose flexibility. When the machine starts and pressure rises, a stiff hose can crack at the bend or at the end of the ferrule. Oil is also thicker, so pressure spikes are higher until the system warms up.

The answer is hose rated for the actual cold-start temperature, correct bend radius, and a warm-up routine before full load.

Choosing hose for winter

Ask for the low-temperature limit of the hose, not just its pressure rating, and compare it with the coldest start at your mine. Keep that rating on file for every position, so a replacement does not quietly bring a summer-grade hose onto a winter machine.

Inspection in the cold season

Look for cracks in the cover at bends and near the ferrules, and for leaks at fittings after cold starts. Check guards and clamps: dust and frozen mud can pack between hoses and the frame.

Checklist for maintenance teams

  • Know the coldest start temperature at the mine
  • Use hose rated for it on every position
  • Warm up before full load
  • Check bends and ferrule ends for cracks
  • Ship winter kits before the cold months

Send a requirement Hydraulic hoses

WhatsApp ↗